CASTECHPC-4410
Low-Range Superplasticizer based on Poly-carboxylate Ether
CASTECH PC-4410 has been primarily developed for applications in the ready mixed and precast concrete industries where the highest durability and performance is required.
Overview
About
CASTECH PC-4410 has been primarily developed for applications in the ready mixed and precast concrete industries where the highest durability and performance is required. The super plasticizing action of CASTECH PC-4410 is different from conventional superplasticizers based on sulfonated melamine and naphthalene formaldehyde condensate, which create electrostatic repulsion of particles. CASTECH PC-4410 initially creates the same electrostatic repulsion and further stabilizes the mix due to the steric repulsion of long lateral chains linked to the polymer backbone.
Typical uses
The excellent dispersion properties of CASTECH PC-4410 make it the ideal admixture for precast and ready mixed concrete where low water cement ratios are required. This property allows the production of very high early and high ultimate strength concrete with minimal voids and therefore optimum density. Due to the strength development characteristics, the elimination or reduction of steam curing in precast works can be considered as an economical option.
Compatibility
CASTECH PC-4410 is compatible with all Portland cements that meet recognized international standards. CASTECH PC-4410 must not be used in conjunction with any other admixture unless prior approval is received from CASTECH Technical Department. CASTECH PC-4410 is suitable for mixes containing: Micro silica, Pulverized fuel ash, Ground granulated blast furnace slag cement.
Benefits
Benefits
CASTECH PC-4410 offers the following benefits for
The ready-mix producer
- Capability of delivering high performance concrete at any time to the job site in place.
- Production of a concrete with low water cement ratios without loss of workability
- Single product for many application needs
The contractor / applicator
- Easier placing and faster strength development
- Improved concrete surfaces
The engineer
- Assurance that concrete meets original specification
- High quality durable concrete
Advantages
During mixing and placement
- High workability without segregation or bleeding
- Can be placed and compacted in congested reinforcement
- Reduced labor requirement
- Improved surface finish
- Chloride free
Effect on hardened concrete properties
- Increased early and ultimate compressive strengths
- Increased flexural strength
- Higher E modulus
- Improved adhesion to reinforcing and stressing steel
- Better resistance to carbonation
- Lower permeability
- Better resistance to aggressive atmospheric conditions
- Reduced shrinkage and creep
- Increased durability
Technical data
| Consistence | Liquid |
|---|---|
| Colour | Light Brown |
| Chloride According to EN 934-2 | Nil |
| Classification According to | Type B and |
| ASTM C494 and ASTM C1017 | Type D |
| Specific Gravity | 1.08±0.02 @ 25°C |
| Air Entrainment | Less than 1.9% |
| pH (ISO 4316) | 4.0 – 6.0 |
| Alkali Content (EN 480-12) (%) | < 3 |
Typical values. Refer to the TDS for full details and test conditions.
Application
Dosage
The normal dosage for CASTECH PC-4410 is between 0.5% and 2.0% per 100 kg of cement (cementitious material). Dosages outside this range are permissible subject to trial mixes.
Application
CASTECH PC-4410 is a ready to use admixture that is added to the concrete at the time of batching. The maximum effect is achieved when CASTECH PC-4410 is added after the addition of 70% to 80% of the water. CASTECH PC-4410 must not be added to the dry materials. Thorough mixing is essential and a minimum mixing cycle, after the addition of CASTECH PC-4410, of 90 seconds for forced action mixers is recommended.
Curing
As with all structural concrete, normal curing methods apply.
Packaging & storage
Packaging
CASTECH PC-4410 is available in IBC, 210-liter drums and in bulk tanks upon request.
Storage & shelf life
CASTECH PC-4410 should be protected from extreme temperature. Should the material become frozen, it must be completely thawed and thoroughly mixed before use. CASTECH PC-4410 has a minimum shelf life of 12 months provided temperature is kept within range 5°C to 30°C.
Health & safety
Health & Safety
CASTECH PC-4410 is non-toxic. Any splashes to the skin should be washed immediately with water. Splashes to the eyes should be washed immediately with water and medical advice should be sought.