Low-range PCE, slump-retaining. High-quality ready-mix & precast at low w/c.

Low-range PCE, slump-retaining. High durability, minimal voids, reduced steam curing.

Low-range PCE, slump-retaining. Faster strength development, optimal density.

Mid-range PCE. High water reduction & fluidity for SCC, precast and hot-weather concreting.

Mid-range PCE. Superior water reduction for ultra-high-strength concrete.

Mid-range PCE. Low w/c, high strength, reduced steam curing.

Mid-range PCE. High strength and durability with fewer voids.

Mid-range PCE. High early and ultimate strength, optimal density.

High-range PCE. Low w/c, high early and ultimate strength for demanding pours.

High-range PCE. Optimal density, minimal voids, reduced steam curing.

High-range PCE. Superior early and ultimate strength, highly durable concrete.

Low-range PCE for precast. Highest water reduction with extreme slump retention.

Low-range PCE for precast. Highest water reduction, extreme slump retention.

Mid-range PCE for precast. Accelerates set and early strength; prestressed, fast-track, cold weather.

Mid-range PCE for precast. Faster set and early strength; earlier tensioning and form reuse.

Mid-range PCE for precast. Faster set and early strength; fast-track and cold weather.

High-range PCE for precast. Highest water reduction, high early compressive strength.

Ultra-high-performance hyperplasticizer for precast. High early strength, excellent fluidity.

High-performance precast superplasticizer. Super-high-strength and flowable concrete; SCC, micro-silica, GGBS, PFA.

Naphthalene-sulphonate, set-retarding HRWR. Flowable, pumped, hot-weather concrete.

Naphthalene-sulphonate HRWR, slump-retaining. Long transport, high elevations, mass pours.

Retarding admixture. Water reduction with maintained workability or set retardation.

Chloride-free liquid accelerator. Faster set and early strength; fast-track, repairs, shotcrete.

Chloride-free liquid accelerator. Faster set and early strength; fast-track, repairs, shotcrete.

Accelerating & strengthening plasticizer. Setting and hardening accelerator for concrete and mortar.

Chloride-free water-repellent and waterproofing admixture. Cuts water absorption; no batching change.

Coupled waterproofing and corrosion inhibitor. Dual protection; marine, foundations, car parks.

Organic migratory corrosion inhibitor. Protects rebar from carbonation and chlorides.

Expanding agent for shrinkage compensation and crack resistance. EA-200 for high-strength and mass concrete.

Micro-silica slurry additive. Boosts strength and durability, low permeability; marine and high-performance.

Chloride-free air-entraining agent. Workability and uniform foam density in lightweight concrete.

Viscosity-modifying admixture. Cuts bleeding and segregation; SCC, precast, infrastructure.

Polyether-based concrete defoamer. Reduces air content; ready-mix and precast.

Steel fibre for concrete. Tensile strength, crack and fatigue resistance; flooring, tunnels, precast.

Polypropylene macro and micro fibre. Crack resistance and flexural strength; floors, precast, shotcrete.

Biodegradable vegetable-oil release agent; stain-free finish with corrosion protection.

Medium-viscosity release agent for all formwork; stops build-up on ready-mix trucks.

High-performance release agent for pumped concrete pipe piles and square piles.

Low-viscosity solvent-based release agent for all formwork; corrosion protection.

White acrylic-based curing compound forming a clear moisture-retaining membrane.

Non-degradable curing and sealing compound based on inorganic materials.

Water-based curing compound, clear or white-pigmented, for large areas.

Acrylic-base bonding agent for cementitious mortars and repair applications.

General-purpose PVA bonding agent for screeds, renders, plasters and repairs.

SBR bonding agent and waterproofing additive; non-toxic and chloride-free.

High-strength solvent-free epoxy bonding agent (>30 N/mm²), moisture-tolerant.

Liquid polymer-latex bonding agent for repair mortars and cementitious mixes.

Extra-smooth cementitious fairing coat for precast concrete and masonry surfaces.

Polymer-modified cementitious fairing coat for 0–3 mm thin-layer repairs.

High-build polymer-modified repair mortar, 10–50 mm, vertical and overhead.

High-strength, free-flowing, shrinkage-compensated micro-concrete.

Two-component solvent-free epoxy fairing compound for industrial floors.

General-purpose non-shrink cementitious grout with adjustable consistency.

High-early-strength non-shrink cementitious grout for critical grouting.

Three-component solvent-free epoxy grout for heavy-duty machinery bases.

Cement-based screed for concrete pavements and floors up to 50 mm.

Cement-based screed for concrete pavements and floors up to 100 mm.

Three-component solvent-free epoxy flooring system for heavy-duty use.

Three-component solvent-free epoxy self-levelling floor system.

High-build epoxy self-levelling floor system, designed for precast.

Two-component solvent-free epoxy primer for porous substrates.

Dry-shake monolithic surface hardener for new concrete floors.

General-purpose tile adhesive for ceramic, glazed and porcelain tiles.

Polymer-modified water-resistant tile adhesive for wet-prone areas.

Highly-polymer waterproof tile adhesive for bathrooms, terraces and pools.

Cement-based polymer-modified adhesive to TS EN 12004 – C1TE.

Premium polymer-modified adhesive for large-format tiles, EN 12004-C2.

Polymer-modified cementitious joint grout for joints up to 5 mm.

Three-component epoxy grout, 75 N/mm², chemical-resistant and hygienic.

Two-component acrylic co-polymer flexible cementitious waterproofing.

Crystalline waterproofing concentrate; self-healing, both-side pressure.

Cold-applied rubberized bitumen emulsion coating; weatherproof.

Cold-applied rubberized bitumen emulsion for tanking and DPM.

Cold-applied rubberized bitumen emulsion; tough, elastic film.

Fibrated cold-applied bitumen emulsion for vertical and horizontal use.

Rubber-modified bitumen emulsion damp-proof membrane.

Thixotropic bitumen emulsion primer and damp-proof sealer.

Solvent-based bitumen primer to ASTM D41 and BS 3416.

Torch-applied APP-modified polyester waterproofing membrane.

Torch-applied SBS elastomeric waterproofing membrane.

Two-component aliphatic polyurethane liquid membrane, UV-stable.

One-component moisture-curing polyurethane joint sealant.

Two-component polyurethane spray insulation foam.

Extruded PVC waterstop for construction and expansion joints.

Water-based single-component acrylic UV-resistant protective coating.

Damp-proof course membrane for vertical and horizontal use.

Bitumen-impregnated compressible fibre joint filler.

Semi-rigid bituminous protection board for waterproofing membranes.

Needle-punched nonwoven polyester geotextile; separation and drainage.

High-efficiency grinding aid and strength enhancer for OPC and blended cements.

Next-generation grinding additive; early strength, reduced water demand.

Grinding additive boosting flowability and particle-size distribution.

Performance enhancer for early strength and grinding efficiency.

Additive accelerating early strength in Portland and blended cements.

Grinding aid and pack-set inhibitor; higher throughput, better silo flow.

Grinding aid and pack-set inhibitor for OPC and blended cements.

Grinding aid and pack-set inhibitor for high-efficiency cement plants.

Grinding aid for White Cement production, maintaining whiteness.